This vignette demonstrates the new functionality in loo v2.0.0 for Bayesian stacking and Pseudo-BMA weighting. In this vignette we can’t provide all of the necessary background on this topic, so we encourage readers to refer to the paper
which provides important details on the methods demonstrated in this vignette. Here we just quote from the abstract of the paper:
Abstract: Bayesian model averaging is flawed in the \(\mathcal{M}\)-open setting in which the true data-generating process is not one of the candidate models being fit. We take the idea of stacking from the point estimation literature and generalize to the combination of predictive distributions. We extend the utility function to any proper scoring rule and use Pareto smoothed importance sampling to efficiently compute the required leave-one-out posterior distributions. We compare stacking of predictive distributions to several alternatives: stacking of means, Bayesian model averaging (BMA), Pseudo-BMA, and a variant of Pseudo-BMA that is stabilized using the Bayesian bootstrap. Based on simulations and real-data applications, we recommend stacking of predictive distributions, with bootstrapped-Pseudo-BMA as an approximate alternative when computation cost is an issue.
Ideally, we would avoid the Bayesian model combination problem by extending the model to include the separate models as special cases, and preferably as a continuous expansion of the model space. For example, instead of model averaging over different covariate combinations, all potentially relevant covariates should be included in a predictive model (for causal analysis more care is needed) and a prior assumption that only some of the covariates are relevant can be presented with regularized horseshoe prior (Piironen and Vehtari, 2017a). For variable selection we recommend projective predictive variable selection (Piironen and Vehtari, 2017a; projpred package).
To demonstrate how to use loo package to compute Bayesian stacking and Pseudo-BMA weights, we repeat two simple model averaging examples from Chapters 6 and 10 of Statistical Rethinking by Richard McElreath. In Statistical Rethinking WAIC is used to form weights which are similar to classical “Akaike weights”. Pseudo-BMA weighting using PSIS-LOO for computation is close to these WAIC weights, but named after the Pseudo Bayes Factor by Geisser and Eddy (1979). As discussed below, in general we prefer using stacking rather than WAIC weights or the similar pseudo-BMA weights.
In addition to the loo package we will also load the rstanarm package for fitting the models.
In Statistical Rethinking, McElreath describes the data for the primate milk example as follows:
A popular hypothesis has it that primates with larger brains produce more energetic milk, so that brains can grow quickly. … The question here is to what extent energy content of milk, measured here by kilocalories, is related to the percent of the brain mass that is neocortex. … We’ll end up needing female body mass as well, to see the masking that hides the relationships among the variables.
'data.frame': 17 obs. of 9 variables:
$ clade : Factor w/ 4 levels "Ape","New World Monkey",..: 4 2 2 2 2 2 2 2 3 3 ...
$ species : Factor w/ 29 levels "A palliata","Alouatta seniculus",..: 11 2 1 6 27 5 3 4 21 19 ...
$ kcal.per.g : num 0.49 0.47 0.56 0.89 0.92 0.8 0.46 0.71 0.68 0.97 ...
$ perc.fat : num 16.6 21.2 29.7 53.4 50.6 ...
$ perc.protein : num 15.4 23.6 23.5 15.8 22.3 ...
$ perc.lactose : num 68 55.2 46.9 30.8 27.1 ...
$ mass : num 1.95 5.25 5.37 2.51 0.68 0.12 0.47 0.32 1.55 3.24 ...
$ neocortex.perc: num 55.2 64.5 64.5 67.6 68.8 ...
$ neocortex : num 0.552 0.645 0.645 0.676 0.688 ...We repeat the analysis in Chapter 6 of Statistical Rethinking using the following four models (here we use the default weakly informative priors in rstanarm, while flat priors were used in Statistical Rethinking).
fit1 <- stan_glm(kcal.per.g ~ 1, data = d, seed = 2030)
fit2 <- update(fit1, formula = kcal.per.g ~ neocortex)
fit3 <- update(fit1, formula = kcal.per.g ~ log(mass))
fit4 <- update(fit1, formula = kcal.per.g ~ neocortex + log(mass))McElreath uses WAIC for model comparison and averaging, so we’ll
start by also computing WAIC for these models so we can compare the
results to the other options presented later in the vignette. The
loo package provides waic methods for
log-likelihood arrays, matrices and functions. Since we fit our model
with rstanarm we can use the waic method provided by the
rstanarm package (a wrapper around waic
from the loo package), which allows us to just pass in
our fitted model objects instead of first extracting the log-likelihood
values.
Warning:
1 (5.9%) p_waic estimates greater than 0.4. We recommend trying loo instead.Warning:
2 (11.8%) p_waic estimates greater than 0.4. We recommend trying loo instead.waics <- c(
waic1$estimates["elpd_waic", 1],
waic2$estimates["elpd_waic", 1],
waic3$estimates["elpd_waic", 1],
waic4$estimates["elpd_waic", 1]
)We get some warnings when computing WAIC for models 3 and 4,
indicating that we shouldn’t trust the WAIC weights we will compute
later. Following the recommendation in the warning, we next use the
loo methods to compute PSIS-LOO instead. The
loo package provides loo methods for
log-likelihood arrays, matrices, and functions, but since we fit our
model with rstanarm we can just pass the fitted model
objects directly and rstanarm will extract the needed
values to pass to the loo package. (Like
rstanarm, some other R packages for fitting Stan
models, e.g. brms, also provide similar methods for
interfacing with the loo package.)
# note: the loo function accepts a 'cores' argument that we recommend specifying
# when working with bigger datasets
loo1 <- loo(fit1)
loo2 <- loo(fit2)
loo3 <- loo(fit3)
loo4 <- loo(fit4)
lpd_point <- cbind(
loo1$pointwise[,"elpd_loo"],
loo2$pointwise[,"elpd_loo"],
loo3$pointwise[,"elpd_loo"],
loo4$pointwise[,"elpd_loo"]
)With loo we don’t get any warnings for models 3 and 4,
but for illustration of good results, we display the diagnostic details
for these models anyway.
Computed from 4000 by 17 log-likelihood matrix.
Estimate SE
elpd_loo 4.5 2.3
p_loo 2.1 0.5
looic -9.1 4.6
------
MCSE of elpd_loo is 0.0.
MCSE and ESS estimates assume MCMC draws (r_eff in [0.5, 1.0]).
All Pareto k estimates are good (k < 0.7).
See help('pareto-k-diagnostic') for details.
Computed from 4000 by 17 log-likelihood matrix.
Estimate SE
elpd_loo 8.4 2.8
p_loo 3.3 0.9
looic -16.8 5.5
------
MCSE of elpd_loo is 0.1.
MCSE and ESS estimates assume MCMC draws (r_eff in [0.4, 1.0]).
All Pareto k estimates are good (k < 0.7).
See help('pareto-k-diagnostic') for details.One benefit of PSIS-LOO over WAIC is better diagnostics. Here for
both models 3 and 4 all \(k<0.7\)
and the Monte Carlo SE of elpd_loo is 0.1 or less, and we
can expect the model comparison to be reliable.
Next we compute and compare 1) WAIC weights, 2) Pseudo-BMA weights without Bayesian bootstrap, 3) Pseudo-BMA+ weights with Bayesian bootstrap, and 4) Bayesian stacking weights.
waic_wts <- exp(waics) / sum(exp(waics))
pbma_wts <- pseudobma_weights(lpd_point, BB=FALSE)
pbma_BB_wts <- pseudobma_weights(lpd_point) # default is BB=TRUE
stacking_wts <- stacking_weights(lpd_point)
round(cbind(waic_wts, pbma_wts, pbma_BB_wts, stacking_wts), 2) waic_wts pbma_wts pbma_BB_wts stacking_wts
model1 0.01 0.02 0.07 0.01
model2 0.01 0.01 0.04 0.00
model3 0.02 0.02 0.04 0.00
model4 0.96 0.95 0.85 0.99With all approaches Model 4 with neocortex and
log(mass) gets most of the weight. Based on theory,
Pseudo-BMA weights without Bayesian bootstrap should be close to WAIC
weights, and we can also see that here. Pseudo-BMA+ weights with
Bayesian bootstrap provide more cautious weights further away from 0 and
1 (see Yao et al. (2018) for a discussion of why this can be beneficial
and results from related experiments). In this particular example, the
Bayesian stacking weights are not much different from the other
weights.
One of the benefits of stacking is that it manages well if there are many similar models. Consider for example that there could be many irrelevant covariates that when included would produce a similar model to one of the existing models. To emulate this situation here we simply copy the first model a bunch of times, but you can imagine that instead we would have ten alternative models with about the same predictive performance. WAIC weights for such a scenario would be close to the following:
waic_wts_demo <-
exp(waics[c(1,1,1,1,1,1,1,1,1,1,2,3,4)]) /
sum(exp(waics[c(1,1,1,1,1,1,1,1,1,1,2,3,4)]))
round(waic_wts_demo, 3) [1] 0.013 0.013 0.013 0.013 0.013 0.013 0.013 0.013 0.013 0.013 0.006 0.016
[13] 0.847Notice how much the weight for model 4 is lowered now that more models similar to model 1 (or in this case identical) have been added. Both WAIC weights and Pseudo-BMA approaches first estimate the predictive performance separately for each model and then compute weights based on estimated relative predictive performances. Similar models share similar weights so the weights of other models must be reduced for the total sum of the weights to remain the same.
On the other hand, stacking optimizes the weights jointly, allowing for the very similar models (in this toy example repeated models) to share their weight while more unique models keep their original weights. In our example we can see this difference clearly:
Method: stacking
------
weight
model1 0.001
model2 0.001
model3 0.001
model4 0.001
model5 0.001
model6 0.001
model7 0.001
model8 0.001
model9 0.001
model10 0.001
model11 0.000
model12 0.000
model13 0.987 Using stacking, the weight for the best model stays essentially unchanged.
Another example we consider is the Kline oceanic tool complexity data, which McElreath describes as follows:
Different historical island populations possessed tool kits of different size. These kits include fish hooks, axes, boats, hand plows, and many other types of tools. A number of theories predict that larger populations will both develop and sustain more complex tool kits. … It’s also suggested that contact rates among populations effectively increases population [sic, probably should be tool kit] size, as it’s relevant to technological evolution.
We build models predicting the total number of tools given the log population size and the contact rate (high vs. low).
data(Kline)
d <- Kline
d$log_pop <- log(d$population)
d$contact_high <- ifelse(d$contact=="high", 1, 0)
str(d)'data.frame': 10 obs. of 7 variables:
$ culture : Factor w/ 10 levels "Chuuk","Hawaii",..: 4 7 6 10 3 9 1 5 8 2
$ population : int 1100 1500 3600 4791 7400 8000 9200 13000 17500 275000
$ contact : Factor w/ 2 levels "high","low": 2 2 2 1 1 1 1 2 1 2
$ total_tools : int 13 22 24 43 33 19 40 28 55 71
$ mean_TU : num 3.2 4.7 4 5 5 4 3.8 6.6 5.4 6.6
$ log_pop : num 7 7.31 8.19 8.47 8.91 ...
$ contact_high: num 0 0 0 1 1 1 1 0 1 0We start with a Poisson regression model with the log population size, the contact rate, and an interaction term between them (priors are informative priors as in Statistical Rethinking).
fit10 <-
stan_glm(
total_tools ~ log_pop + contact_high + log_pop * contact_high,
family = poisson(link = "log"),
data = d,
prior = normal(0, 1, autoscale = FALSE),
prior_intercept = normal(0, 100, autoscale = FALSE),
seed = 2030
)Before running other models, we check whether Poisson is good choice as the conditional observation model.
Computed from 4000 by 10 log-likelihood matrix.
Estimate SE
elpd_loo -40.2 5.9
p_loo 5.0 1.7
looic 80.5 11.9
------
MCSE of elpd_loo is 0.1.
MCSE and ESS estimates assume MCMC draws (r_eff in [0.5, 0.7]).
All Pareto k estimates are good (k < 0.7).
See help('pareto-k-diagnostic') for details.We get at least one observation with \(k>0.7\) and the estimated effective
number of parameters p_loo is larger than the total number
of parameters in the model. This indicates that Poisson might be too
narrow. A negative binomial model might be better, but with so few
observations it is not so clear.
We can compute LOO more accurately by running Stan again for the
leave-one-out folds with high \(k\)
estimates. When using rstanarm this can be done by
specifying the k_threshold argument:
All pareto_k estimates below user-specified threshold of 0.7.
Returning loo object.
Computed from 4000 by 10 log-likelihood matrix.
Estimate SE
elpd_loo -40.2 5.9
p_loo 5.0 1.7
looic 80.5 11.9
------
MCSE of elpd_loo is 0.1.
MCSE and ESS estimates assume MCMC draws (r_eff in [0.5, 0.7]).
All Pareto k estimates are good (k < 0.7).
See help('pareto-k-diagnostic') for details.In this case we see that there is not much difference, and thus it is relatively safe to continue.
As a comparison we also compute WAIC:
Warning:
3 (30.0%) p_waic estimates greater than 0.4. We recommend trying loo instead.
Computed from 4000 by 10 log-likelihood matrix.
Estimate SE
elpd_waic -39.9 5.9
p_waic 4.7 1.7
waic 79.8 11.8
3 (30.0%) p_waic estimates greater than 0.4. We recommend trying loo instead. The WAIC computation is giving warnings and the estimated ELPD is slightly more optimistic. We recommend using the PSIS-LOO results instead.
To assess whether the contact rate and interaction term are useful, we can make a comparison to models without these terms.
fit11 <- update(fit10, formula = total_tools ~ log_pop + contact_high)
fit12 <- update(fit10, formula = total_tools ~ log_pop)
Computed from 4000 by 10 log-likelihood matrix.
Estimate SE
elpd_loo -39.7 5.8
p_loo 4.4 1.6
looic 79.4 11.6
------
MCSE of elpd_loo is 0.1.
MCSE and ESS estimates assume MCMC draws (r_eff in [0.5, 1.0]).
All Pareto k estimates are good (k < 0.7).
See help('pareto-k-diagnostic') for details.Warning: Found 1 observation(s) with a pareto_k > 0.7. We recommend calling 'loo' again with argument 'k_threshold = 0.7' in order to calculate the ELPD without the assumption that these observations are negligible. This will refit the model 1 times to compute the ELPDs for the problematic observations directly.
Computed from 4000 by 10 log-likelihood matrix.
Estimate SE
elpd_loo -42.5 4.7
p_loo 4.1 1.1
looic 85.0 9.4
------
MCSE of elpd_loo is NA.
MCSE and ESS estimates assume MCMC draws (r_eff in [0.4, 0.6]).
Pareto k diagnostic values:
Count Pct. Min. ESS
(-Inf, 0.7] (good) 9 90.0% 649
(0.7, 1] (bad) 1 10.0% <NA>
(1, Inf) (very bad) 0 0.0% <NA>
See help('pareto-k-diagnostic') for details.All pareto_k estimates below user-specified threshold of 0.7.
Returning loo object.1 problematic observation(s) found.
Model will be refit 1 times.
Fitting model 1 out of 1 (leaving out observation 10)lpd_point <- cbind(
loo10$pointwise[, "elpd_loo"],
loo11$pointwise[, "elpd_loo"],
loo12$pointwise[, "elpd_loo"]
)For comparison we’ll also compute WAIC values for these additional models:
Warning:
3 (30.0%) p_waic estimates greater than 0.4. We recommend trying loo instead.Warning:
5 (50.0%) p_waic estimates greater than 0.4. We recommend trying loo instead.waics <- c(
waic10$estimates["elpd_waic", 1],
waic11$estimates["elpd_waic", 1],
waic12$estimates["elpd_waic", 1]
)The WAIC computation again gives warnings, and we recommend using PSIS-LOO instead.
Finally, we compute 1) WAIC weights, 2) Pseudo-BMA weights without Bayesian bootstrap, 3) Pseudo-BMA+ weights with Bayesian bootstrap, and 4) Bayesian stacking weights.
waic_wts <- exp(waics) / sum(exp(waics))
pbma_wts <- pseudobma_weights(lpd_point, BB=FALSE)
pbma_BB_wts <- pseudobma_weights(lpd_point) # default is BB=TRUE
stacking_wts <- stacking_weights(lpd_point)
round(cbind(waic_wts, pbma_wts, pbma_BB_wts, stacking_wts), 2) waic_wts pbma_wts pbma_BB_wts stacking_wts
model1 0.38 0.36 0.31 0.0
model2 0.58 0.63 0.53 0.8
model3 0.04 0.02 0.16 0.2All weights favor the second model with the log population and the contact rate. WAIC weights and Pseudo-BMA weights (without Bayesian bootstrap) are similar, while Pseudo-BMA+ is more cautious and closer to stacking weights.
It may seem surprising that Bayesian stacking is giving zero weight to the first model, but this is likely due to the fact that the estimated effect for the interaction term is close to zero and thus models 1 and 2 give very similar predictions. In other words, incorporating the model with the interaction (model 1) into the model average doesn’t improve the predictions at all and so model 1 is given a weight of 0. On the other hand, models 2 and 3 are giving slightly different predictions and thus their combination may be slightly better than either alone. This behavior is related to the repeated similar model illustration in the milk example above.
loo_model_weights functionAlthough in the examples above we called the
stacking_weights and pseudobma_weights
functions directly, we can also use the loo_model_weights
wrapper, which takes as its input either a list of pointwise
log-likelihood matrices or a list of precomputed loo objects. There are
also loo_model_weights methods for stanreg objects (fitted
model objects from rstanarm) as well as fitted model
objects from other packages (e.g. brms) that do the
preparation work for the user (see, e.g., the examples at
help("loo_model_weights", package = "rstanarm")).
Method: stacking
------
weight
fit10 0.000
fit11 0.802
fit12 0.198 Method: pseudo-BMA+ with Bayesian bootstrap
------
weight
fit10 0.310
fit11 0.539
fit12 0.151 Method: pseudo-BMA
------
weight
fit10 0.356
fit11 0.628
fit12 0.015 McElreath, R. (2016). Statistical rethinking: A Bayesian course with examples in R and Stan. Chapman & Hall/CRC. http://xcelab.net/rm/statistical-rethinking/
Piironen, J. and Vehtari, A. (2017a). Sparsity information and regularization in the horseshoe and other shrinkage priors. In Electronic Journal of Statistics, 11(2):5018-5051. Online.
Piironen, J. and Vehtari, A. (2017b). Comparison of Bayesian predictive methods for model selection. Statistics and Computing, 27(3):711-735. :10.1007/s11222-016-9649-y. Online.
Vehtari, A., Gelman, A., and Gabry, J. (2017). Practical Bayesian model evaluation using leave-one-out cross-validation and WAIC. Statistics and Computing. 27(5), 1413–1432. :10.1007/s11222-016-9696-4. online, arXiv preprint arXiv:1507.04544.
Vehtari, A., Simpson, D., Gelman, A., Yao, Y., and Gabry, J. (2024). Pareto smoothed importance sampling. Journal of Machine Learning Research, 25(72):1-58. PDF
Yao, Y., Vehtari, A., Simpson, D., and Gelman, A. (2018). Using stacking to average Bayesian predictive distributions. In Bayesian Analysis, :10.1214/17-BA1091. Online.