WVPlots examples

Win-Vector LLC

2024-04-22

Some example data science plots in R using ggplot2. See https://github.com/WinVector/WVPlots for code/details.

set.seed(34903490)
x = rnorm(50)
y = 0.5*x^2 + 2*x + rnorm(length(x))
frm = data.frame(
  x = x,
  y = y,
  yC = y>=as.numeric(quantile(y,probs=0.8)),
  stringsAsFactors = FALSE)
frm$absY <- abs(frm$y)
frm$posY = frm$y > 0

Scatterplots

Scatterplot with smoothing line through points.

WVPlots::ScatterHist(frm, "x", "y", title="Example Fit")

Scatterplot with best linear fit through points. Also report the R-squared and significance of the linear fit.

WVPlots::ScatterHist(frm, "x", "y", smoothmethod="lm", 
                     title="Example Linear Fit", estimate_sig = TRUE)

Scatterplot compared to the line x = y. Also report the coefficient of determination between x and y (where y is “true outcome” and x is “predicted outcome”).

WVPlots::ScatterHist(frm, "x", "y", smoothmethod="identity", 
                     title="Example Relation Plot", estimate_sig = TRUE)

Scatterplot of (x, y) color-coded by category/group, with marginal distributions of x and y conditioned on group.

set.seed(34903490)
fmScatterHistC = data.frame(
  x=rnorm(50),
  y=rnorm(50),
  stringsAsFactors = FALSE)
fmScatterHistC$cat <- fmScatterHistC$x+fmScatterHistC$y>0
WVPlots::ScatterHistC(fmScatterHistC, "x", "y", "cat", title="Example Conditional Distribution")

Scatterplot of (x, y) color-coded by discretized z. The continuous variable z is binned into three groups, and then plotted as by ScatterHistC

set.seed(34903490)
frmScatterHistN = data.frame(
  x=rnorm(50),
  y=rnorm(50),
  stringsAsFactors = FALSE)
frmScatterHistN$z <- frmScatterHistN$x+frmScatterHistN$y
WVPlots::ScatterHistN(frmScatterHistN, "x", "y", "z", title="Example Joint Distribution")

Plot the relationship y as a function of x with a smoothing curve that estimates \(E[y | x]\). If y is a 0/1 variable as below (binary classification, where 1 is the target class), then the smoothing curve estimates \(P(y | x)\). Since \(y \in \{0,1\}\) with \(y\) intended to be monotone in \(x\) is the most common use of this graph, BinaryYScatterPlot uses a glm smoother by default (use_glm=TRUE, this is essentially Platt scaling), as the best estimate of \(P(y | x)\).

WVPlots::BinaryYScatterPlot(frm, "x", "posY", use_glm=FALSE,
                            title="Example 'Probability of Y' Plot (ggplot2 smoothing)")

WVPlots::BinaryYScatterPlot(frm, "x", "posY", use_glm=TRUE, 
                            title="Example 'Probability of Y' Plot (GLM smoothing)")

Hexbin Plot

if(requireNamespace("hexbin", quietly = TRUE)) {
  set.seed(5353636)
  
  df = rbind(data.frame(x=rnorm(1000, mean = 1), 
                        y=rnorm(1000, mean = 1, sd = 0.5 ),
                        stringsAsFactors = FALSE),
             data.frame(x = rnorm(1000, mean = -1, sd = 0.5), 
                        y = rnorm(1000, mean = -1, sd = 0.5),
                        stringsAsFactors = FALSE),
             stringsAsFactors = FALSE)
  
  print(WVPlots::HexBinPlot(df, "x", "y", "Two gaussians"))
}

Gain Curves

set.seed(34903490)
y = abs(rnorm(20)) + 0.1
x = abs(y + 0.5*rnorm(20))

frm = data.frame(
  model=x, 
  value=y,
  stringsAsFactors = FALSE)

frm$costs=1
frm$costs[1]=5
frm$rate = with(frm, value/costs)

frm$isValuable = (frm$value >= as.numeric(quantile(frm$value, probs=0.8)))

Basic curve: each item “costs” the same. The wizard sorts by true value, the x axis sorts by the model, and plots the fraction of the total population.

WVPlots::GainCurvePlot(frm, "model", "value", title="Example Continuous Gain Curve")

We can annotate a point of the model at a specific x value

gainx = 0.10  # get the top 10% most valuable points as sorted by the model

# make a function to calculate the label for the annotated point
labelfun = function(gx, gy) {
  pctx = gx*100
  pcty = gy*100
  
  paste("The top ", pctx, "% most valuable points by the model\n",
        "are ", pcty, "% of total actual value", sep='')
}

WVPlots::GainCurvePlotWithNotation(frm, "model", "value", 
                                   title="Example Gain Curve with annotation", 
                          gainx=gainx,labelfun=labelfun)

When the x values have different costs, take that into account in the gain curve. The wizard now sorts by value/cost, and the x axis is sorted by the model, but plots the fraction of total cost, rather than total count.

WVPlots::GainCurvePlotC(frm, "model", "costs", "value", title="Example Continuous Gain CurveC")

ROC Plots

set.seed(34903490)

# data with two different regimes of behavior
frm <- rbind(
  data.frame(
    model = rnorm(1000),
    isValuable = sample(c(TRUE, FALSE), prob = c(0.02, 0.98), size = 1000, replace = TRUE)),
  data.frame(
    model = rnorm(200) + 5,
    isValuable = sample(c(TRUE, FALSE), size = 200, replace = TRUE))
)

WVPlots::ROCPlot(frm, "model", "isValuable", TRUE, title="Example ROC plot")

Plotting the ROC of two models on the same data, where predictions and true outcome all in the same data frame.

set.seed(34903490)

x1 = rnorm(50)
x2 = rnorm(length(x1))
y = 0.2*x2^2 + 0.5*x2 + x1 + rnorm(length(x1))
frmP = data.frame(
  x1=x1,
  x2=x2,
  yC = y>=as.numeric(quantile(y,probs=0.8)),
  stringsAsFactors = FALSE)
# WVPlots::ROCPlot(frmP, "x1", "yC", TRUE, title="Example ROC plot")
# WVPlots::ROCPlot(frmP, "x2", "yC", TRUE, title="Example ROC plot")
WVPlots::ROCPlotPair(frmP, "x1", "x2", "yC", TRUE, title="Example ROC pair plot")

Plotting the results from two data sets, for example the results of a model on training and test sets, where predictions/outcome for the two data sets are in different data frames.

set.seed(2342458)

make_data <- function(nrows) {
    d <- data.frame(x = rnorm(nrows))
    d['y'] = sin(d['x']) + 0.25*rnorm(n = nrows)
    d['x2'] = rnorm(n = nrows)
    d['yc'] = d[['y']]>0.5
    return(d)
}


training <- make_data(500)
test <- make_data(200)

model <- glm(yc ~ x + x2, data=training, family=binomial)

training$pred <- predict(model, newdata=training, type="response")
test$pred <- predict(model, newdata=test, type="response")

WVPlots::ROCPlotPair2(nm1 = "Training", # model 1
                      frame1 = training,
                      xvar1 = "pred",  truthVar1 = "yc", truthTarget1 = TRUE,
                      nm2 ="Test", # model 2
                      frame2 = test,
                      xvar2 = "pred", truthVar2 = "yc", truthTarget2 = TRUE,
                      title = "Model performance, training vs test",
                      estimate_sig = FALSE)

Many ROC plots on the same graph.

set.seed(34903490)
x1 = rnorm(50)
x2 = rnorm(length(x1))
x3 = rnorm(length(x1))
y = 0.2*x2^2 + 0.5*x2 + x1 + rnorm(length(x1))
frm_m = data.frame(
   x1 = x1,
   x2 = x2,
   x3 = x3,
   yC = y >= as.numeric(quantile(y,probs=0.8)))
WVPlots::ROCPlotPairList(
   frame = frm_m,
   xvar_names = c("x1", "x2", "x3"),
   truthVar = "yC", truthTarget = TRUE,
   title = "Example ROC list plot")

Precision-Recall-Threshold Plot

Plots precision and recall as functions of different classifier thresholds.

WVPlots::PRTPlot(frm, "model", "isValuable", TRUE, title="Example Precision-Recall plot")

Threshold Plot

ThresholdPlot() plots a variety of functions of different classifier thresholds.

# replicate PRTPlot. Looks a little different because ThresholdPlot does different smoothing
WVPlots::ThresholdPlot(frm, "model", "isValuable", title="Reproduce PRTPlot",
              truth_target=TRUE, # default
              metrics = c("precision", "recall"))
## Warning: Removed 1 row containing missing values or values outside the scale range
## (`geom_line()`).

# default: sensitivity/specificity
WVPlots::ThresholdPlot(frm, "model", "isValuable", 
                       title="Sensitivity and Specificity as a Function of Threshold")

One useful application of ThresholdPlot is to “unroll” an ROC plot: if the ROC shows that your model can meet an acceptable trade-off of true positive rate and false positive rate, then ThresholdPlot can tell you which threshold achieves that goal.

WVPlots::ThresholdPlot(frm, "model", "isValuable", title="ROC 'unrolled'",
              metrics = c("true_positive_rate", "false_positive_rate"))

An extended example can be found here.

Double Density Plot

WVPlots::DoubleDensityPlot(frm, "model", "isValuable", title="Example double density plot")

Double Histogram Plot

WVPlots::DoubleHistogramPlot(frm, "model", "isValuable", title="Example double histogram plot")

Cleveland Style Dotplots

set.seed(34903490)

# discrete variable: letters of the alphabet
# frequencies of letters in English
# source: http://en.algoritmy.net/article/40379/Letter-frequency-English
letterFreqs = c(8.167, 1.492, 2.782, 4.253, 12.702, 2.228,
                2.015, 6.094, 6.966, 0.153, 0.772, 4.025, 2.406, 6.749, 7.507, 1.929,
                0.095, 5.987, 6.327, 9.056, 2.758, 0.978, 2.360, 0.150, 1.974, 0.074)
letterFreqs = letterFreqs/100
letterFrame = data.frame(
  letter = letters, 
  freq=letterFreqs, 
  stringsAsFactors = FALSE)

# now let's generate letters according to their letter frequencies
N = 1000
randomDraws = data.frame(
  draw=1:N, 
  letter=sample(letterFrame$letter, size=N, replace=TRUE, prob=letterFrame$freq), 
  stringsAsFactors = FALSE)

WVPlots::ClevelandDotPlot(randomDraws, "letter", title = "Example Cleveland-style dot plot")

WVPlots::ClevelandDotPlot(randomDraws, "letter", limit_n = 10,  title = "Top 10 most frequent letters")

WVPlots::ClevelandDotPlot(randomDraws, "letter", sort=0, title="Example Cleveland-style dot plot, unsorted")

WVPlots::ClevelandDotPlot(randomDraws, "letter", sort=1, stem=FALSE, title="Example with increasing sort order + coord_flip, no stem") + ggplot2::coord_flip()

ClevelandDotPlot also accepts an integral x variable. You probably want sort = 0 in this case.

set.seed(34903490)
N = 1000
ncar_vec = 0:5
prob = c(1.5, 3, 3.5, 2, 1, 0.75); prob = prob/sum(prob)

df = data.frame(
  num_cars = sample(ncar_vec, size = N, replace = TRUE, prob=prob),
  stringsAsFactors = FALSE)
WVPlots::ClevelandDotPlot(df, "num_cars", sort = 0, title = "Distribution of household vehicle ownership")

Shadow Plots

Plot a bar chart of row counts conditioned on the categorical variable condvar, faceted on a second categorical variable, refinevar. Each faceted plot also shows a “shadow plot” of the totals conditioned on condvar alone.

This plot enables comparisons of sub-population totals across both condvar and refinevar simultaneously.

set.seed(354534)
N = 100

# rough proportions of eye colors
eprobs = c(0.37, 0.36, 0.16, 0.11)

eye_color  = sample(c("Brown", "Blue", "Hazel", "Green"), size = N, replace = TRUE, prob = eprobs)
sex = sample(c("Male", "Female"), size = N, replace = TRUE)

# A data frame of eye color by sex
dframe = data.frame(
  eye_color = eye_color, 
  sex = sex,
  stringsAsFactors = FALSE)

WVPlots::ShadowPlot(dframe, "eye_color", "sex", title = "Shadow plot of eye colors by sex")

Shadow Histogram

Plot a histogram of a continuous variable xvar, faceted on a categorical conditioning variable, condvar. Each faceted plot also shows a “shadow plot” of the unconditioned histogram for comparison.

set.seed(354534)
N = 100

dframe = data.frame(
  x = rnorm(N), 
  gp = "region 2", 
  stringsAsFactors = FALSE)
dframe$gp = with(dframe, ifelse(x < -0.5, "region 1", 
                                ifelse(x > 0.5, "region 3", gp)))

WVPlots::ShadowHist(dframe, "x", "gp", title = "X values by region")
## Warning: The `<scale>` argument of `guides()` cannot be `FALSE`. Use "none" instead as
## of ggplot2 3.3.4.
## ℹ The deprecated feature was likely used in the WVPlots package.
##   Please report the issue at <https://github.com/WinVector/WVPlots/issues>.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.

ShadowHist uses the Brewer Dark2 palette by default. You can pass in another Brewer palette to change the color scheme. If you prefer all the histograms to be the same color, set monochrome=TRUE.

WVPlots::ShadowHist(dframe, "x", "gp", title = "X values by region", monochrome=TRUE)

To use a non-Brewer palette, such as viridis, or a manual color map, set palette=NULL. Here’s an example of setting the color palette manually.

colormap = c("#1F968BFF", "#29AF7FFF", "#55C667FF")

WVPlots::ShadowHist(dframe, "x", "gp", title = "X values by region", palette=NULL) +
  ggplot2::scale_fill_manual(values=colormap)

ScatterBox Plots

classes = c("a", "b", "c")
means = c(2, 4, 3)
names(means) = classes
label = sample(classes, size=1000, replace=TRUE)
meas = means[label] + rnorm(1000)
frm2 = data.frame(label=label,
                  meas = meas,
                  stringsAsFactors = FALSE)

WVPlots::ScatterBoxPlot(frm2, "label", "meas", pt_alpha=0.2, title="Example Scatter/Box plot")

WVPlots::ScatterBoxPlotH(frm2, "meas", "label",  pt_alpha=0.2, title="Example Scatter/Box plot")

Discrete Distribution Plot

frmx = data.frame(x = rbinom(1000, 20, 0.5),
                  stringsAsFactors = FALSE)
WVPlots::DiscreteDistribution(frmx, "x","Discrete example")

Distribution and Count Plots

Compare observations to a normal distribution with the same mean and standard deviation.

set.seed(52523)
d <- data.frame(wt=100*rnorm(100),
                stringsAsFactors = FALSE)
WVPlots::PlotDistCountNormal(d,'wt','example')

WVPlots::PlotDistDensityNormal(d,'wt','example')

Compare “coin flip” observations to a binomial distribution

Compare to a binomial with the same success rate as the observed data

set.seed(13951)
trial_size = 20  # one trial is 20 flips
ntrial = 100     # run 100 trials
true_frate = 0.4  # true heads probability
fdata = data.frame(n_heads = rbinom(ntrial, trial_size, true_frate),
                   stringsAsFactors = FALSE)

title = paste("Distribution of head counts, trial size =", trial_size)
# compare to empirical p
WVPlots::PlotDistCountBinomial(fdata, "n_heads", trial_size, title)

Compare to a binomial with a specified success rate

# compare to theoretical p of 0.5
WVPlots::PlotDistCountBinomial(fdata, "n_heads", trial_size, title,
                      p = 0.5)

Compare observed rate data to a beta distribution with same mean and standard deviation

set.seed(349521)
N = 100  # number of cohorts
psucc = 0.15  # true success rate in population
group_size = round(runif(N, min=25, 50))  # sizes of observed sample groups
nsucc = rbinom(N, group_size, psucc)   # successes in each group
hdata = data.frame(n_success=nsucc, 
                   group_size=group_size,
                   stringsAsFactors = FALSE)

# observed rate of successes in each group
hdata$rate_success = with(hdata, n_success/group_size)

title = "Observed prevalence of success in population"

WVPlots::PlotDistHistBeta(hdata, "rate_success", title) 

WVPlots::PlotDistDensityBeta(hdata, "rate_success", title)

Smoothed Scatterplots

y = c(1,2,3,4,5,10,15,18,20,25)
x = seq_len(length(y))
df = data.frame(x=x,
                y=y,
                stringsAsFactors = FALSE)

WVPlots::ConditionalSmoothedScatterPlot(df, "x", "y", NULL, title="centered smooth, one group")

WVPlots::ConditionalSmoothedScatterPlot(df, "x", "y", NULL, title="left smooth, one group", align="left")

WVPlots::ConditionalSmoothedScatterPlot(df, "x", "y", NULL, title="right smooth, one group", align="right")

n = length(x)
df = rbind(data.frame(x=x, y=y+rnorm(n), gp="times 1", stringsAsFactors = FALSE),
           data.frame(x=x, y=0.5*y + rnorm(n), gp="times 1/2", stringsAsFactors = FALSE),
           data.frame(x=x, y=2*y + rnorm(n), gp="times 2", stringsAsFactors = FALSE),
           stringsAsFactors = FALSE)

WVPlots::ConditionalSmoothedScatterPlot(df, "x", "y", "gp", title="centered smooth, multigroup")

WVPlots::ConditionalSmoothedScatterPlot(df, "x", "y", "gp", title="left smooth, multigroup", align="left")

WVPlots::ConditionalSmoothedScatterPlot(df, "x", "y", "gp", title="right smooth, multigroup", align="right")

Density Plot with Shaded Tail

set.seed(52523)
d = data.frame(meas=rnorm(100), stringsAsFactors = FALSE)
threshold = -1.5
WVPlots::ShadedDensity(d, "meas", threshold, 
                       title="Example shaded density plot, left tail")

WVPlots::ShadedDensity(d, "meas", -threshold, tail="right", 
                       title="Example shaded density plot, right tail")

Density Plot with Shaded Central Region

set.seed(52523)
d = data.frame(meas=rnorm(100), stringsAsFactors = FALSE)
# first and third quartiles of the data (central 50%)
boundaries = quantile(d$meas, c(0.25, 0.75))
WVPlots::ShadedDensityCenter(d, "meas", boundaries, 
                       title="Example center-shaded density plot")