IR DEFINITIONS ::= BEGIN -- ANSI Z39.50 version 2 - July 1, 1992 PDU ::= CHOICE{ initRequest [20] IMPLICIT InitializeRequest, initResponse [21] IMPLICIT InitializeResponse, searchRequest [22] IMPLICIT SearchRequest, searchResponse [23] IMPLICIT SearchResponse, presentRequest [24] IMPLICIT PresentRequest, presentResponse [25] IMPLICIT PresentResponse, deleteResultSetRequest [26] IMPLICIT DeleteResultSetRequest, deleteResultSetResponse [27] IMPLICIT DeleteResultSetResponse, accessControlRequest [28] IMPLICIT AccessControlRequest, accessControlResponse [29] IMPLICIT AccessControlResponse, resourceControlRequest [30] IMPLICIT ResourceControlRequest, resourceControlResponse [31] IMPLICIT ResourceControlResponse, triggerResourceControlRequest [32] IMPLICIT TriggerResourceControlRequest, resourceReportRequest [33] IMPLICIT ResourceReportRequest, resourceReportResponse [34] IMPLICIT ResourceReportResponse} -- new APDUs can be added in the future at the end of this list. -- InitializeRequest ::=SEQUENCE{ referenceId ReferenceId OPTIONAL, protocolVersion ProtocolVersion, -- proposed version of the protocol to be used (see below). options Options, -- proposed set of services to be used preferredMessageSize PreferredMessageSize, -- origin proposal for the size of large messages (where message size is -- the sum of sizes, in bytes, of the records in an APDU) the target -- should normally use when presenting groups of records; however, the -- first record in a response is permitted to cause the message to -- exceed this size (see also maximumRecordSize below). maximumRecordSize MaximumRecordSize, -- origin proposal for maximum record size (number of bytes). -- Value must be greater than or equal to -- preferredMessageSize. idAuthentication [7] ANY OPTIONAL, -- information as required by the target to access the -- responding IRPM; syntax of this parameter to be -- defined by the target prior to communication. implementationId ImplementationId OPTIONAL, implementationName ImplementationName OPTIONAL, implementationVersion ImplementationVersion OPTIONAL, userInformationField UserInformationField OPTIONAL} -- InitializeResponse ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, protocolVersion ProtocolVersion, options Options, preferredMessageSize PreferredMessageSize, -- target decision on maximum APDU size (see description under -- InitializationRequest definition).Value is allowed to be different -- from what origin proposed in the Initialization Request; if origin -- does not agree on target values, it may abort the connection. maximumRecordSize MaximumRecordSize, -- target decision on the maximum record size result [12] IMPLICIT BOOLEAN, -- result of the processing of the request at the target. -- reject = FALSE; Accept = TRUE. implementationId ImplementationId OPTIONAL, implementationName ImplementationName OPTIONAL, implementationVersion ImplementationVersion OPTIONAL, userInformationField UserInformationField OPTIONAL} -- -- Auxiliary definitions for Initialization APDUs ProtocolVersion ::= [3] IMPLICIT BIT STRING -- represents a string of Boolean values, each value representing -- a version. The first value set to 1 indicates version 1 is available, -- the second value set to 1 indicates version 2 is available, and so on. -- Values higher than the highest known version should be ignored. Both the -- Initialize and Initialize Response APDUs include a value string -- corresponding to the supported versions. The highest common version is -- selected for use. If there are no versions in common, the Initialize -- Response APDU should indicate a value of "reject" for the parameter -- Result. Note: Versions 1 and 2 are identical. Systems supporting -- version 2 should indicate support for version 1 as well, -- for interoperability with systems that indicate support for -- version 1 only (e.g. ISO 10163 implementations). Options ::= [4] IMPLICIT BIT STRING {search (0), present (1), delSet (2), resourceReport (3), triggerResourceCtrl (4), resourceCtrl (5), accessCtrl (6)} -- In InitializeRequest, for bits 0 through 4, ON indicates initiator does -- request use of service; for bits 5 and 6, ON indicates initiator will -- support service.For InitializeResponse, for bit 0 through 4, ON indicates -- target will support service;for bits 5 and 6,ON indicates target requests -- service. For extensibility of the protocol, additional bits set should -- not be considered to be an error on received InitializeRequest. -- PreferredMessageSize ::= [5] IMPLICIT INTEGER MaximumRecordSize ::= [6] IMPLICIT INTEGER -- ImplementationId ::= [110] IMPLICIT VisibleString -- a unique identifier for the origin or target implementation ImplementationName ::= [111] IMPLICIT VisibleString -- a descriptive name for the origin or target implementation ImplementationVersion ::= [112] IMPLICIT VisibleString -- descriptive name for the origin or target impl. version -- these three implementation parameters are provided solely for -- the convenience of implementors needing to distinguish implemen- -- tations. They shall not be the subject of conformance tests. UserInformationField ::= [11] EXTERNAL -- additional information, not defined in this standard. -- end auxiliary definitions for initialization APDUs SearchRequest ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, smallSetUpperBound [13] IMPLICIT INTEGER, -- if the number of hits is less or equal to this number, all records are -- to be returned in the SearchResponse (within the limits given by the -- negotiated preferred-MessageSize and maximumRecordSize), composed as -- specified by the smallSetElementSetNames parameter below. May be zero. largeSetLowerBound [14] IMPLICIT INTEGER, -- if the number of hits is equal or greater than this, no records are -- to be returned. Must be greater than smallSetUpperBound. mediumSetPresentNumber [15] IMPLICIT INTEGER, -- maximum number records to be returned in the SearchResponse if the number -- of hits is between largeSetLowerBound and smallSetUpperBound (again -- within the limits given by PreferredMessageSize and MaximumRecordSize), -- composed as specified by mediumSetRecordElementSetNames replaceIndicator [16] IMPLICIT BOOLEAN, -- origin indicates whether or not to replace a previously created result -- set with the same name by the one that is constructed in this search. resultSetName [17] IMPLICIT VisibleString, -- origin proposal for naming of the result set that is constructed if hits -- are found. If target allows the origin to assign names to result sets, -- it uses this proposed name. If the target does not support named result -- sets, it returns an error diagnostic. databaseNames [18] IMPLICIT SEQUENCE OF DatabaseName, -- database(s) in which the search will be performed. smallSetElementSetNames [100] IMPLICIT ElementSetNames OPTIONAL, -- origin proposal for composition of the records in the small -- set (see above under smallSetUpperBound). mediumSetElementSetNames [101] IMPLICIT ElementSetNames OPTIONAL, -- origin proposal for the composition of the records in the -- medium set (see above under mediumSetPresentNumber). preferredRecordSyntax PreferredRecordSyntax OPTIONAL, -- origin proposal for abstract syntax of the database records to be -- returned in the SearchResponse. Values subject to registration. query [21] Query} -- the search argument (see description below). -- Query ::= CHOICE {type-0 [0] ANY, type-1 [1] IMPLICIT RPNQuery, type-2 [2] OCTET STRING, type-100 [100] OCTET STRING, type-101 [101] IMPLICIT OCTET STRING} -- the search argument contained in the SearchRequest. -- Five types are defined: -- a) A type-0 query may be used only when the -- origin and target have an a priori -- agreement outside of this standard as to form of query -- acceptable to target. -- b) type-1 is the Reverse Polish Notation (RPN) query (see below). -- c) type-2 is the ISO8777 type query, specified in ISO 8777. -- d) type-100 is the Z39.58 type query, specified in ANSI Z39.58. -- e) type-101 is the proximity query, specified in Appendix G. -- RPNQuery ::= SEQUENCE{ attributeSetId OBJECT IDENTIFIER, -- identifies attribute set RPNStructure} RPNStructure ::= CHOICE { [0] Operand, [1] IMPLICIT SEQUENCE { RPNStructure, RPNStructure, Operator }} -- Operand ::= CHOICE{ AttributesPlusTerm, ResultSetId} AttributesPlusTerm::= [102] IMPLICIT SEQUENCE{ AttributeList, Term} AttributeList ::= [44] IMPLICIT SEQUENCE OF AttributeElement Term ::= [45] IMPLICIT OCTET STRING -- the type OCTET STRING is used to enable the inclusion of multibyte -- character representations which the types CharacterString and -- VisibleString might impose on graphic character repertoire. Operator ::= [46] CHOICE{ and [0] IMPLICIT NULL, or [1] IMPLICIT NULL, and-not [2] IMPLICIT NULL} -- AttributeElement ::= SEQUENCE{ AttributeType, AttributeValue} AttributeType ::= [120] IMPLICIT INTEGER AttributeValue ::= [121] IMPLICIT INTEGER -- AttributeType and AttributeValue interpretation is governed by the -- values contained in the definition identified by AttributeSetId -- SearchResponse ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, resultCount [23] IMPLICIT INTEGER, -- number of hits resulting from the search. numberOfRecordsReturned NumberOfRecordsReturned, -- number of records in the search results below. nextResultSetPosition NextResultSetPosition, -- the ordinal number in the result set of the record appearing -- directly after the last record in the search Results below. searchStatus [22] IMPLICIT BOOLEAN, -- result of the processing of the request at the target IRPM. -- success = TRUE; failure = FALSE. resultSetStatus [26] IMPLICIT INTEGER{ subset (1), interim (2), none (3)} OPTIONAL, -- occurs if and only if search-status is FALSE. Indicates the -- presence and validity of the result set produced. presentStatus PresentStatus OPTIONAL, -- occurs if and only if search-status is TRUE. Indicates -- presence and validity of records appearing in search results databaseOrDiagnosticRecords Records OPTIONAL} -- the records (diagnostic and/or bibliographic) resulting -- from the search (see description below). PresentRequest ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, resultSetId ResultSetId, -- identification of result set from which to retrieve records resultSetStartPoint [30] IMPLICIT INTEGER, -- ordinal number in the result set of the first record to -- appear in the present results in the PresentResponse. numberOfRecordsRequested [29] IMPLICIT INTEGER, -- specifies maximum number records to be returned in present -- results in the PresentResponse (within limits given by the -- negotiated message and record size parameters), composed as -- specified by the element set names parameter below. ElementSetNames OPTIONAL, -- origin proposal for the composition of the records to be -- returned in the Present Response preferredRecordSyntax PreferredRecordSyntax OPTIONAL} -- origin proposal for abstract syntax of the database records -- to be returned in the present results in the Present -- Response. Values subject to registration, at present by -- specification in Appendix E. -- -- PresentResponse ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, numberOfRecordsReturned NumberOfRecordsReturned, -- number of records returned in the records parameter below. nextResultSetPosition NextResultSetPosition, -- ordinal number in the result set of the record -- appearing directly after the last record returned presentStatus PresentStatus, -- indicates the presence and validity of the records databaseOrDiagnosticRecords Records OPTIONAL} -- the presented records -- -- -- begin auxiliary definitions for search and present APDUs Records ::= CHOICE{ dataBaseOrSurDiagnostics [28] IMPLICIT SEQUENCE OF NamePlusRecord, nonSurrogateDiagnostic [130] IMPLICIT DiagRec} -- NamePlusRecord ::= SEQUENCE{ [0] IMPLICIT DatabaseName OPTIONAL, -- presence of DatabaseName is conditional. See 3.2.2.1.7 and 3.2.3.1.5. [1] CHOICE{databaseRecord [1] DatabaseRecord, surrogateDiagnostic [2] DiagRec}} -- DatabaseRecord ::= EXTERNAL -- the database record syntax is defined outside of this standard. -- For bibliographic data, USMARC is a prime example. -- DiagRec ::= SEQUENCE{ diagnosticSetId OBJECT IDENTIFIER, condition INTEGER, -- interpretation of condition is governed by values -- contained in definition identified by DiagnosticSetId. addinfo VisibleString} -- add'l information. ElementSetNames ::= [19] CHOICE{ generic [0] IMPLICIT ElementSetName, databaseSpecific [1] IMPLICIT SEQUENCE OF SEQUENCE{ DatabaseName, ElementSetName}} -- ElementSetName ::= [103] IMPLICIT VisibleString -- A target must always recognize the value "F" to mean "full record". -- -- begin miscellaneous definitions for search and present APDUs NumberOfRecordsReturned ::= [24] IMPLICIT INTEGER NextResultSetPosition ::= [25] IMPLICIT INTEGER PresentStatus ::= [27] IMPLICIT INTEGER{ success (0), partial-1 (1), partial-2 (2), partial-3 (3), partial-4 (4), failure (5)} PreferredRecordSyntax ::= [104] IMPLICIT OBJECT IDENTIFIER -- end miscellaneous definitions for search and present APDUs -- end auxiliary definitions for search and present APDUs -- -- DeleteResultSetRequest ::=SEQUENCE{ referenceId ReferenceId OPTIONAL, deleteOperation [32] IMPLICIT INTEGER{ list (0), all (1)}, resultSetList SEQUENCE OF ResultSetId OPTIONAL } -- identification of result sets to be deleted if operation is "list" -- DeleteResultSetResponse ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, deleteOperationStatus [0] IMPLICIT DeleteSetStatus, -- Reports status for entire delete operation. -- Values limited to "success" or "failure-3" through -- "failure-9". Values of "failure-7" -- and "failure-8" may be used only if operation is "all". deleteListStatuses [1] IMPLICIT ListStatuses OPTIONAL, -- Must occur if operation is "list". Individual status -- values limited to "success" through "failure-6". numberNotDeleted [34] IMPLICIT INTEGER OPTIONAL, -- No. sets target failed to delete. -- Occurs only if operation is "all". bulkStatuses [35] IMPLICIT ListStatuses OPTIONAL, -- occurs if and only if DeleteSetStatus equals 8. Individual -- statuses limited to "success" through "failure-6" deleteMessage [36] IMPLICIT VisibleString OPTIONAL} -- textual message concerning the delete operation. -- -- begin auxiliary definitions for delete ListStatuses ::= SEQUENCE OF SEQUENCE{ ResultSetId, DeleteSetStatus} DeleteSetStatus ::= [33] IMPLICIT INTEGER{ success (0), resultSetDidNotExist (1), previouslyDeletedByTarget (2), systemProblemAtTarget (3), accessNotAllowed (4), resourceControlAtOrigin (5), resourceControlAtTarget (6), bulkDeleteNotSupported (7), notAllRsltSetsDeletedOnBulkDlte (8), notAllRequestedResultSetsDeleted (9)} -- 7 and 8 used only if operation is "all". -- end auxiliary definitions for delete -- AccessControlRequest ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, securityChallenge CHOICE{ oldway [37] IMPLICIT OCTET STRING, newway [0] EXTERNAL}} -- AccessControlResponse ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, securityChallengeResponse CHOICE{ oldway [38] IMPLICIT OCTET STRING, newway [0] EXTERNAL}} -- -- ResourceControlRequest ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, suspendedFlag [39] IMPLICIT BOOLEAN OPTIONAL, -- "true" = suspended resourceReport [40] ResourceReport OPTIONAL, partialResultsAvailable [41] IMPLICIT INTEGER{ subset (1), interim (2), none (3)} OPTIONAL, responseRequired [42] IMPLICIT BOOLEAN, -- "true" means that the target requires a response triggeredRequestFlag [43] IMPLICIT BOOLEAN OPTIONAL} -- "true" means request triggered by a trigger-resource-control request -- ResourceControlResponse ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, continueFlag [44] IMPLICIT BOOLEAN, -- true = continue resultSetWanted [45] IMPLICIT BOOLEAN OPTIONAL} -- "true" = "result set wanted", required during a search if -- Continue flag is false; otherwise should not occur TriggerResourceControlRequest ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, requestedOperation [46] IMPLICIT INTEGER{ resourceReport (1), resourceControl (2), cancel (3)}, preferredResourceReportFormat[47] IMPLICIT ResourceReportId OPTIONAL, resultSetWanted [48] IMPLICIT BOOLEAN OPTIONAL} -- -- ResourceReportRequest ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, preferredResourceReportFormat [49] IMPLICIT ResourceReportId OPTIONAL} -- -- ResourceReportResponse ::= SEQUENCE{ referenceId ReferenceId OPTIONAL, resourceReportStatus [50] IMPLICIT INTEGER{ success (0), partial (1), failure-1 (2), failure-2 (3), failure-3 (4), failure-4 (5)}, resourceReport [51] ResourceReport OPTIONAL} -- -- -- Begin auxiliary definitions for resource control ResourceReport ::= EXTERNAL ResourceReportId ::= OBJECT IDENTIFIER -- End auxiliary definitions for resource control -- -- begin global auxiliary definitions ReferenceId ::= [2] IMPLICIT OCTET STRING -- value provided by the service originator in the Request APDU, target -- required to send it back unaltered in corresponding response APDU DatabaseName ::= [105] IMPLICIT VisibleString ResultSetId ::= [31] IMPLICIT VisibleString -- end global auxiliary definitions END -- IR